Immersion heater 2000 watts, 50 cm

The immersion heater with automatic switch-off has so far proven itself very well on every construction site.

The immersion heater is ideal for heating large quantities of water, which is guaranteed within a few minutes thanks to the 2000 watt energy output. The device is simply placed in the pot filled with water to be heated so that the water surrounds the entire radiator in order to complete the process as quickly as possible. However, the water must not come too close to the electrical connections of the immersion heater in the handle, otherwise a short circuit could result. The new immersion heater is absolutely reliable thanks to the automatic switch-off and ensures your safety on the construction site by automatically interrupting the power supply if the heating coil overheats to prevent accidents. As soon as the immersion heater has cooled down again, it does not need a regeneration phase, but is immediately ready for use again as soon as the temperature sensor has cooled down and has been submerged under water again. With just a firm press of the button, you can restart the rapid heating process and do other things in the meantime, saving you a lot of time and eliminating additional work.

This quick process is ideal for silicone cartridges, for example, as they can be heated in hot water in just a few seconds. This makes them much quicker and easier to process.

Since they probably have different sizes and depths of containers for the water to be heated, we offer the immersion heater in a long and a short version. However, please note: For an immersion heater with a length of 43 cm, the immersion depth is 28 cm, for an immersion heater with a length of 50 cm, the immersion depth is 40 cm, in order not to endanger the electronic connections mentioned above.

If you are interested in the shorter version of the immersion heater, we have the link to the smaller model here:

• Immersion heater 2000 watts, 43 cm