Immersion heater 2000 watts, 43 cm

Our immersion heater with automatic switch-off has proven itself very well on every construction site.

The immersion heater is ideal for heating larger amounts of water, as it can do this within a few minutes thanks to its 2000 watts of power. You simply place the immersion heater in the bucket filled with the water to be heated so that the water surrounds the entire radiator if possible in order to complete the heating process as quickly as possible. However, the hot water must not come too close to the electrical connections in the handle of the immersion heater , as touching it could cause a short circuit. Thanks to the automatic switch-off, the new immersion heater is absolutely reliable and guarantees your safety when handling the device, as the device automatically switches off the power supply if the heating coil overheats, thus preventing accidents. However, the immersion heater does not need a regeneration phase after cooling down, but as soon as the temperature sensor has cooled down again and has been submerged under water again, it is ready for use again. You restart the rapid heating process with a simple, firm press of the power button and can concentrate on other things while you do this, saving you a lot of time and eliminating additional work.

For silicone cartridges, for example, the quick process is ideal, as they can be heated with hot water in just a few seconds and are therefore much quicker and easier to process.

Since the depth and size of the water containers can of course vary, we offer the immersion heater in a short and a long version. However, you should note that for an immersion heater with a length of 43 cm, the immersion depth is 28 cm, for an immersion heater with a length of 50 cm, the immersion depth is 40 cm, in order not to endanger the electronic connections as mentioned above.

If you have a larger container, we have the link to our larger immersion heater here.

• Immersion heater 2000 watts, 50 cm