Leveling system pull hoods transparent 3-12 mm

NEW: Transparent pull hoods for the tile leveling system - perfect for sensitive surfaces

Scope of delivery:

• 150 transparent draft hoods
• 1 transport bucket

The advantages of the transparent draft hoods:

• The transparent draft hoods are perfect for laying XXL tiles so that you get a tooth-free result
• They can be used in the same way as the black leveling system pull hoods, for tiles with a thickness of 3 - 12 mm.
• Thanks to the transparent plastic, they leave no traces of abrasion on the tiled floor

The easy use of the tile leveling system:

1. Pull up the adhesive bed and insert the first tile
2. Now take a base threaded tab and insert the tab so that half of the base tab plate is under the first tile
3. Place the next tile on the edge where the threaded tab is located so that the tab is fixed in the joint between the two tiles. Depending on which of our basic threaded tabs you use, you will now receive joint widths between 1 and 2 mm
4. To level the tiles, take a transparent pull hood and screw it onto the thread of the base tab. By rotating the pull hood, the tiles lying next to each other are raised to the same level - done!

Our leveling system for tiles offers the following advantages over other leveling systems:

• You do n't need any other tools such as pliers or guns, the leveling system only consists of the pull hoods and the threaded tabs
• Laying with the leveling system is easily and quickly integrated into the laying process
• You can readjust the pull hoods even if they are already tightened, in contrast to e.g. B. wedge leveling systems
• The system can be used both on the wall and on the floor
• The transparent, but also the black and gray draft hoods are reusable - this means low purchase and low running costs
• You will never want to lay without a leveling system again

If you have any questions about the application or the products in general, call us or write to us:
Tel. 08667 878145 or info@fliesenwerkzeug24.com