Chisel 60 mm
Chisel 60 mm
fliesenwerkzeug24
Couldn't load pickup availability
The chisel is the ideal tool for removing tile coverings
The chisel is ideal as a correction tool. When removing old tiles, the tile covering may still stick to the wall or floor. Because this cannot be removed by hand, we have our excellent chisel for this purpose. It can be used to simply knock down coverings. The application is also self-explanatory. Simply place the chisel on the tile to be removed and tap the back end of the chisel with a hammer. Thanks to its flat end, the chisel can be hit easily and thus transmits the force of the blow better. The ergonomically shaped tip makes it very easy to use and makes it even easier to get into smaller cracks, as the tip comes to a point at the end, but then quickly widens again in order to quickly expand even smaller gaps and remove the tile coverings from the wall break. The tip tapers to a point on both sides so you can attach it from both sides and don't have to turn it every time. The weight of the chisel is also kept low so that it does not become heavy in the hand over time and you can work longer. Its medium-wide tip of 60 mm means that a relatively large area of tile coverings can be removed in a short time, but it can also be used to work precisely and delicately.
However, we have several other chisels in our range than just the chisel for removing tile coverings.
If you need a slightly larger tile chisel , we can offer you one with a diameter of 12 mm at the tip
-Tile chisel 12 mm
To easily chisel out tile joints, we recommend the special joint chisel with a cutting width of 25 x 2 mm
-Special joint chisel 25 x 2 mm
And if you need an even larger chisel, you can purchase one from us with a width of 80 mm.
-Chisel 80 mm
