Joint dyer anthracite

The water-based color system in anthracite

JOINT DYER - FOR COLORING AND SEALING OLD JOINTS

The water-based paint system allows you to impregnate and color your joints. It protects the joints from water, acid-based contamination and oil spills. Maintaining your joints is made easier and the surface structure is not changed.

Particularities:

• Ideal for resolving complaints about discolored joints.
• Offers optimal protection against contamination, especially in the food sector.
• Thanks to the joint dyer, the joint is protected for up to 15 years.

This is how the joint dye is used correctly:

• Before you start applying the joint dye, you must first remove dirt and coatings from the joint using a joint brush.
• You can then work the joint dye in with a small brush or brush, but you should make sure that the joint is dry, as adhesion is not guaranteed with a wet joint.
• After the work is done, you can remove the grout dye from the tile with water and a special cleaning sponge. Since the grout dye only bonds to the grout and not to the tile, the color sticks to the grout while the color on the tiles appears to be on its own goes down. The beauty and easy care of the joint will last for a long time.

Coverage: approx. 2.5 - 7.5 square meters per layer and size depending on the size and porosity of the joint, temperature, humidity and type of application.

The joint dye is also available in these colors:

• Item FW12406 white
• Item FW12408 linen white
• Item FW12409 light beige
• Item FW12430 limestone
• Item FW12423 silver
• Item FW12424 light gray
• Item FW12425 gray
• Item FW12412 ochre
• Item FW12429 mocha
• Item FW12416 cocoa
• Item FW12432 dark anthracite
• Item FW12428 black

The perfect application is achieved with our joint dye bottle with integrated brush head

• Grout dye bottle

Do you have any questions about our grout dyer in anthracite? Then just call us on 08667 878145 or write us an email: info@fliesenwerkzeug24.com

We are available to contact you at any time